Instruction manual / UR2025
P7 of P8
2.14 Store into memory
•
To store the tuning frequency of radio station being received into any of the preset memory, press
<MEM Set> once. The ‘MEM’ goes flashing.
•
Select the desired memory station by pressing the corresponding key until its number goes solid
above
‘MEM’.
•
Press <MEM Set> again to confirm the process of storing. Then, ‘MEM’ goes solid.
•
Press other key to start its corresponding function.
2.15 Search Up/Down
•
When the radio is ON, press <UP> once to change the receiving frequency up by 1 step .
•
Press <DOWN> once to change the receiving frequency down by 1 step .
•
Press and hold <UP> to search the next radio station by moving the receiving frequency up.
•
Press and hold <DOWN> to search the next radio station by moving the receiving frequency down.
2.16 Memory review
•
When the radio is ON, press <MEM / AMS> once to scan the 10 preset memory stations.
•
The review starts from the next memory station or MEM-1 if no memory station is being selected.
•
Review will stop at each station for 5 seconds.
•
During review, press other key will start its corresponding function and the review process will be
terminated.
2.17 AMS Using
•
Press and hold <MEM / AMS> 2 seconds to active AMS mode. In this mode, the radio will
automatically store the station that had been scanned.
2.18 Electronic Volume Control
•
Only when radio is on,
•
Press <VOL +> once, to increase speaker volume by one step. Hold for continually.
•
Press <VOL -> once, to decrease speaker volume by one step. Hold for continually.
2.19 Key-lock
•
Press and hold the <MEM Set/Lock> for 2 seconds, key-lock has been switched ON, the “KEY” goes
solid.
