M_SCD8000 / English Instruction Manual
5
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
Tune to a station by turning the
TUNING
dial on the unit or pressing the
/TUN.-
or
/TUN.+
button on the remote control. The station frequency is shown on the display.
To tune to a preset station:
To tune to the next preset station, press the
FOLDER/MEM./10 +
button on the unit or remote
control.
To tune to the previous preset, press the
FOLDER/MEM./10
–
button on the unit or remote
control.
AUTO PRESET MEMORY/SCAN
To scan for stations within reception range and save them automatically to preset memory,
press and hold the
PLAY/PAUSE/PAIR/SELECT
button on the unit or the
PLAY/PAUSE/SCAN
button on the remote control. After the unit has finished scanning, the unit will automatically tune
to preset number 1.
MANUAL PRESET MEMORY OPERATION
You may pre-store 30 radio stations in the memory.
1. Rotate the tuning dial on the unit or press the
/TUN.-
or
/TUN.+
button on the remote
control to select the desired station that you want to save as a preset.
2. Press and hold the
PROG./P-MODE/M.
button on the unit or the
MEMORY
button on the
remote control
until the display shows “Preset Store”. Use the
or
button to choose a
preset memory position (for example, “Preset 1”), then press the
PLAY/PAUSE/PAIR/SELECT
button on the unit or the
PLAY/PAUSE/SCAN
button on the
remote control to confirm. Repeat this operation to save up to 30 preset stations.
3. Press the
FOLDER/MEM./10 +/-
buttons on the unit or the
FOLD./10/M. UP/DOWN
buttons
on the remote control to switch between the stored stations.
DAB RADIO MODE
DAB radio mode receives DAB/DAB+ digital radio and displays information about the station
and programmed/track as broadcast. Press the
FUNCTION
button until display reads “Welcome
to DAB”.
Scanning for stations
1. To do a full scan, press the
STOP/MENU
butto
n to enter menu selection, select the “Full
scan” option and press the
PLAY/PAUSE/PAIR/SELECT
button on the unit or
PLAY/PAUSE/SCAN
button on the remote control to confirm. Once a full scan is complete,
the radio returns to play the previously-selected station or first station on the station list.
2. To choose between the scanned station list, press the
or
button to scroll through the
list of stations and press the
PLAY/PAUSE/PAIR/SELECT
button to confirm. The Now
playing screen will display the new station details.
3. To remove stations that are listed but unavailable, press the
STOP/MENU
button to enter
menu selection, select
the “Prune” option and press the
PLAY/PAUSE/PAIR/SELECT
button
to enter, press the
or
button to choose YES or NO option, then press the
PLAY/PAUSE/PAIR/SELECT
button to confirm. This removes all invalid stations, indicated in
