BASIC OPERATION
4
ENGLISH
Switching on/off: Save energy
Whether you are using mains or battery supply,
to avoid unnecessary energy consumption
always adjust the
ON/OFF switch
to
OFF
.
1. To select your sound source, adjust the
FUNCTION
selector to
RAIDO
,
TAPE
or
CD/ USB
.
2. Adjust the sound with
VOLUME.
3. To switch off the power, set the ON/OFF
switch to
OFF
position.
Radio reception
1. Turn the function selector to
RADIO
.
2. Turn the BAND selector to a desired setting
(FM ST., FM or AM)
3. Rotate the TUNING control to find the desired
stations, the frequency will show on display.
4. If the BAND selector is set to FM ST. and a
station with stereo broadcast is received
accurately.
When you have finished listening, slide the
ON/OFF switch to the
OFF
position.
−
If FM reception is weak, stereo may be indi-
cated but the sound may not be good. In this
case, set the
BAND
selector to
FM
to receive
in
mono
only.
−
For FM, pull out the telescopic antenna.
Incline and turn the antenna. Reduce its
length if the signal is too strong (very close
to a transmitter).
−
For AM the set is provided with a built-in
antenna so the telescopic antenna is not
needed. Direct the antenna by turning the set
itself.
PLAYING A CASSETTE
1. Select TAPE source.
2. Press
STOP/EJECT
to open the cassette door.
3. Insert a cassette and close the cassette door.
4. Press
PLAY
to start playback.
5. To interrupt playback, press
PAUSE
. To resume, press
PAUSE
again.
6. by pressing
FF
or
REW
on the set, fast winding of the tape is possible in both directions.
7. To stop the tape, press
STOP/EJECT.
The keys are automatically released at the end of the tape, except if
PAUSE
has been
activated.
