USING HOUSE CURRENT
Before use, check that the rated voltage
of your unit matches your local voltage.
Note: Plug is used as the disconnect device.
The disconnect device shall remain readily
operable.
USING BATTERIES
Disconnect the AC power cord from the AC inlet of the
unit. Battery power is cut automatically by the cord while
it is connected.
Insert eight UM-2 ( size C ) batteries.
battery door
When the volume decrease, or the sound distorts, replace
all of the batteries with new ones.
To AC socket
To AC outlet
ADJUSTING THE SOUND
WHEN RECORDING
The VOLUME control may be adjusted with no effect on
the recorded signal.
FOR PRIVATE LISTENING
Plug in headphones (ø3.5 mm stereo mini-plug) to the
PHONES jack.
When headphones are plugged in, the speakers are
automatically disconnected.
TO ADJUST THE VOLUME
MIN. MAX.
VOLUME
POWER SUPPLY
GB 2
TURN ON / OFF THE SYSTEM
POWER
Press the POWER button to turn the audio on.
To change the audio mode between CD, RADIO AND TAPE ,
set the FUNCTION switch while the power is on.
The audio mode is displayed.
Turn off the unit by pressing the POWER button.
" OFF " word will be shown on the display and then resume
the current time.
LCD display
The clock is displayed on LCD display at standby mode.
on LCD display at standby mode.
1. Press and hold the PROG / CLOCK-ADJ./PLAY MODE button,
2. Press the NEXT or BACK to select 12 hours or 24 hours display.
3. Press the PROG / CLOCK-ADJ./PLAY MODE button,
the hour digit flash.
the hour digit flash.
4. Press the NEXT or BACK to adjust hour digit.
5. Press the PROG / CLOCK-ADJ./PLAY MODE button,
the minute digit flash.
6. Press the NEXT or BACK to adjust minute digit.
7. Press the PROG / CLOCK-ADJ./PLAY MODE button again,
the correct time is shown on display.
CLOCK ADJUSTMENT
CLOCK-ADJ.
LCD display
