10
The erase head and record/play head and the surface of the pinch roller are delicate and must not be
touched with metal objects such as screwdrivers. You may find it easier to clean the assembly by
pressing the PLAY button to bright head and pinch roller into view. Be sure to press the STOP button
after cleaning the mechanism.
Damage to the pinch wheel can occur if the unit is left in PLAY mode with the power switch off. Under
no circumstances should you attempt to lubricate any part of the machine.
USING THE CD/MP3
Discs for Playback
This system can playback all digital audio CD/MP3/WMA discs, finalized digital audio CD-Recordable
(CD-R) discs and finalized digital audio CD-Rewritable (CD-RW) discs.
LOADING A DISC
1.
Set the FUNCTION switch to CD/MP3 position.
2.
Open the CD door. “
OP
” will be shown on the display.
3.
Place an audio CD/MP3 into the tray with the label side facing up.
4.
Close the CD door. The total number of tracks and the disc type will appear on the display after
several seconds.
5.
To remove the CD, press CD DOOR OPEN/CLOSE to open CD compartment lid, grasp the CD by
its edges, and carefully take it out.
Note:
z
To ensure good system performance; wait until the disc tray completely reads the disc before
proceeding.
z
If no disc is loaded into the compartment, or the disc is placed upside down, the display will show
“
NO
”.
Playing A Disc
1.
Press the PLAY/PAUSE button to start playback, the playback starts from track 1, “
” will appear
on the display. Adjust the volume by the VOLUME knob.
2.
To interrupt playback, press the PLAY/PAUSE button, “ ” and the track number will flash on the
display.
3.
To resume playback, press the PLAY/PAUSE button again.
4.
To stop playback, press the STOP button, the total number of tracks appears on the display.
Selecting A Different Track During Play
1.
Press CD SKIP FORWARD/BACKWARD button continuously until the desired track number
appears in the display.
2.
Playback starts from the desired track. (Press CD PLAY/PAUSE button to start playback in stop
mode).
Starting Again With the Track That Is Currently Playing
1.
Press CD SKIP BACKWARD button once.
2.
The playback will start again from the beginning of the track.
Stopping Play
1.
Press CD STOP button if you wish to stop play. The total track number which can be played will
now appear on the display.
2.
Open the CD door on the unit to remove the CD.
