SOUNDMASTER SCD 5850MP3, Руководство пользователя

Страница: 4 / 12

AC OPERATION
Before operation please ensure voltage on the set corresponds to voltage of
your local area. Unravel AC line cord; insert one end into AC socket on the
set while the other end into a standard AC outlet.
Remarks:
In case of malfunction due to electrostatic discharge (ESD), reset the unit by
reconnecting AC cord again to resume to normal operation.
When not in use – Unplug AC power cord completely from AC power socket.
Warning:
The power cable/disconnect device shall remain easy to operate/disconnect.
When you are not going to use the unit for a long period of time, disconnect
the AC power cord. Where the mains plug or an appliance coupler is used as
disconnecting device, the disconnecting device shall remain operable.
BATTERY OPERATION
Disconnect AC cord set completely. Open the BATTERY DOOR and insert UM-
2/ “C” size x 8 batteries
(not supplied)
making sure the indicated battery
polarity is observed.
When not in use – Remove all batteries if the unit will not be used for few
months or more.
RADIO OPERATION
1. Slide FUNCTION SWITCH to “RADIO” position.
2. Slide BAND SWITCH to the desired waveband.
3. Turn the TUNING KNOB to your desired radio station.
4. Adjust sound level by rotating VOLUME CONTROL KNOB.
5. To turn off radio, simply slide FUNCTION SWITCH to “TAPE (OFF)” position.
FM stereo indicator
When tuned to FM Stereo broadcast “FM ST. LED INDICATOR” will light up.
In some weak signal areas, FM Stereo signal may not be strong enough and
can cause excessive background noise. In this case, slide the BAND SWITCH
to “FM” position.
Antennas
For best reception, fully extend FM ANTENNA to receive FM stations.
For AM reception, the unit has a built-in antenna, turn the whole unit for best
reception.
English - 2