English - 9
“
” and blink continuously. Repeat above procedure to check all
programs being stored.
5.
To cancel the programmed memory :
¾
During the CD stop mode, press the CD STOP BUTTON once.
OR
¾
Open the CD Door during the CD stop mode.
The “PROGRAM” Indicator will disappear from the LCD DISPLAY.
USB OPERATION
IMPORTANT NOTE :
This unit supports most of the common MP3 interface but not 100% because
there are too many different formats keep on changing in the market.
1.
Slide the FUNCTION SWITCH to “CD” position.
2.
Press the CD/USB BUTTON once, LCD DISPLAY will show “USB” indicator.
Remarks : When there has no MP3 Player or Flash
drive connecting to the USB PORT, LCD
DISPLAY will show “no”.
3.
Insert the USB plug of an Auxiliary unit (e.g.: Portable
MP3 Player or Flash Drive) into the USB PORT in this unit, total number of
music will be shown on the LCD DISPLAY.
4.
Press the CD PLAY/PAUSE BUTTON to start playing the
music.
5.
Operate all the CD control buttons as mentioned in
above section “PLAYING MP3 DISC”, they have all the
same function and operation method.
6.
To exit from the USB playback mode, press the CD/USB BUTTON again. It
will go back to CD DISC mode again.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE APPLIANCE TO RAIN
OR MOISTURE. DO NOT REMOVE COVER, PILOT LAMPS SOLDERED IN PLACE. NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
