2
Unit power supply (mains AC230V/50Hz)
1. Check if the power voltage, as shown on the type plate located on the bottom of the set,
corresponds to your local AC power supply. If it does not, consult your dealer or service center.
2. Connect the power cord to the AC MAINS inlet and the wall outlet. The power supply is now
connected and ready for use.
3. To switch off completely, unplug the power cord from the wall outlet.
• Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.
General operation
1. To select your sound source adjust the source selector to CD/OFF/RADIO.
2. Adjust the sound with the VOLUME.
3. To switch off the set, adjust the source selector to off position.
RADIO OPERATION
Radio reception
1. Slide the FUNCTION selector to RADIO.
2. Slide the BAND selector to a desired setting - FM STEREO, FM, AM.
3. Rotate the TUNING control to find the desired stations.
NOTE: If the BAND selector is set to the FM stereo position and you have tuned to an FM stereo
station, the FM stereo LED indicator will light.
4. When you have finished listening, slide the FUNCTION selector to the OFF position to shut the
power off.
For better reception
For FM, pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal
is too strong (very close to a transmitter).
– For AM the set is provided with a built-in antenna so the telescopic antenna is not needed. Direct
the antenna by turning the whole set.
CD SECTION
Playing a CD
This CD-player can play Audio Discs, CD-R.
Do not try to play CD-ROM, CDi, VCD, DVD or computer CD.
1. Adjust the source selector to CD.
Display: shows “NO” Briefly.
2. To open the CD door, lift the CD door at the edge marked OPEN/CLOSE.
3. Insert a CD disc with the printed side facing up and press the CD door gently close.
4. Press >|| on the set to start playback.
5. To pause playback press >||. To resume, press again.
6. To stop CD playback, press STOP
■
.
Note: CD play will also stop when:
z
you open the CD compartment;
z
you select RADIO sound source;
z
the CD has reached to the end.
