RADIO OPERATION
1. Switch the MAINPOWER SWITCH (14) to ON
“I”
position
2. Slide the FUNCTION switch (3) to RADIO position
3. Slide the BAND selector (2) to a desired setting FM/AM
4. Rotate the TUNING control (17) to desired station
5. Rotate the VOLUME control (4) to desired volume
6. When you finish listening, switch the MAINPOWER switch (14) to OFF
“O”
position
-
FM:
Pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal
is too strong.
-
AM:
The item is provided with a built-in antenna. Direct the antenna by turning the whole set.
CD OPERATION
1.
Switch the MAINPOWER SWITCH (14) to ON
“I”
position
2.
Slide the FUNCTION switch (3) to CD position
3.
Open the CD door and insert a CD/-R/-RW with the printed side facing up and close the CD
door.
4. Press
PLAY/PAUSE (9) on the set to start playback
5. Press
►►
(7) once briefly for the next track or press repeatedly until the desired track number
appears in the display.
6.
Press
◄◄
(10) once briefly to return the beginning of the current track.
7.
Press
◄◄
(10) more than once briefly for a previous track
8.
To stop CD playback briefly, press PLAY/PAUSE (9). To resume playback, press it again.
9.
To stop playback, press STOP button
■
(8)
10.
When you finish listening, switch the mainpower switch (14) to OFF
“O”
position
CD repeat
Press 1x REPEAT button (5) to repeat the current track
Æ
REP indicator flash on LCD display
Press 2x REPEAT button (5) to repeat all tracks
Æ
REP indicator light up on LCD display
Press 3x REPEAT button (5) to cancel the function
CD program
With these function, you can set your tracks in a desired sequence. (max. 20 tracks)
1.
In stop mode, press the PRG (6) button
Æ
“PROG” and “01” flash on display
2. Press
◄◄
(10)
or
►►
(7) button to select your desired track
3.
When your chosen track number appears on display, press PRG (6) once to store the track.
4.
Repeat the steps 2 and 3 to select and store all desired track in this way (max. 20 tracks)
5.
To play your program, press PLAY/PAUSE
(9) button
6.
To erase a program, press STOP
■
(8) button
Copyright by Woerlein GmbH, 90556 Cadolzburg,
www.woerlein.com
Changes of technical specifications without further notice
