SOUNDMASTER MCD7950, Руководство пользователя

Страница: 10 / 10

EN-9
TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair. Do not open
the set as there is a risk of electric shock.
Warning:
Under no circumstances should you try to repair the set yourself, as this will invalidate the war-
ranty .
Problem Cause Solution
No sound / power V olume not adjusted Adjust the V olume
Power cord not securely con -
nected
Connect the AC cord properly
Display does not function pro -
perly / No reaction to operati -
on of any of the controls
Electrostatic discharge Switch o f f and unplug aunplug
the set. Reconnect after a few
seconds
Poor cassette sound quality Dust and dirt on the head, etc. Clean deck parts , etc.
Use of incompatible cassette
types (ME TAL or CHROME)
Only use NORMA L (IEC I) for
recordng
Recording not possible Cassette tab(s) may be bro -
ken
Apply a piece of adhesive
tape over the missing tab
space
The CD skips tracks CD damaged or dirty Replace or clean CD
Program is active Quit program mode
No disc indication No CD inserted Insert a CD, CD-R or CD-R W
CD badly scratched or dirty Replace or clean CD
Laser lens has steamed up W ait until lens has cleared
CD-R is blank or the disc is
not finalized
Use a finalized CD-R
CD Playback does not work CD badly scratched or dirty Replace or clean CD
Laser lens steamed up W ait until lens has adjusted to
room temperature
The CD skips tracks CD damaged or dirty Replace or clean CD
Program is active Quit Program mode(s)