ENGLISH
ENG 4
PLAYBACK
1. Plug or slot in USB / SD card device to the port.
2. Set the “FUNCTION” selector to “CD / MP3 / USB” mode.
3. It will read and automatic playing USB / SD card, if no disc on disc tray.
4. It will read and automatic playing DISC, if have disc on disc tray.
5. Press and hold the “PLAY / PAUSE / USB” button for a few seconds to entry USB / SD mode.
6. Press and hold the “STOP” button for a few seconds to change play USB or SD card.
PROGRAM, MODE
The operation of PROGRAM, MODE are as the same as that of CD / MP3. Please refer to CD / MP3
OPERATION.
RECORD OPERATION
ENCODING SINGLE SONG FROM CD / MP3 DISC TO USB / SD CARD DEVICE
1. Set the “FUNCTION” selector to “CD” mode.
2. Open the CD door and place a CD / MP3 disc with the label up in the CD compartment.
3. Close the CD door.
4. Focus search is performed and will auto play if disc is inside.
5. Press the “STOP” button to stop the auto playback.
6. Press the “BIT RATE” button and press the “SKIP +” or “SKIP -” button to choose the desired bit
rate. Press the “BIT RATE” button again to confirm. (*CD only)
7. Press the “PLAY” button to play track.
8. Plug or slot in USB / SD card device to the port.
9. Press the “REC” button, the display will show “REC” and “USB / CARD”, “USB” is flash.
10.Press the “SKIP +” or “SKIP -” button to choose the desired media.
11.Press the “REC” button again, the appliance will start recording from the beginning to the end of the
song.
ENCODING ALL SONG FROM CD / MP3 DISC TO USB / SD CARD DEVIC
Please repeat step 1 until 6 above named Encoding single song.
7. Plug or slot in USB / SD card device to the port.
8. Press the “REC” button, the display will show “REC” and “USB / CARD”, “USB” is flash.
9. Press the “SKIP +” or “SKIP -” button to choose the desired media.
10.Press the “REC” button again, the appliance will start recording from the beginning to the
end of the CD / MP3.
ENCODING FROM TAPE TO USB / SD CARD DEVICE
1. Set the “FUNCTION” selector to “TAPE” mode. TAPE be playing.
2. Plug or slot in USB / SD card device to the port.
3. Press the “BIT RATE” button and press the “SKIP +” or “SKIP -” button to choose the desired
bit rate. Press the “BIT RATE” button again to confirm.
4. Press the “REC” button twice, the display will show “REC” and flash. Appliance will start
recording. Press the “STOP” button to complete.
ENCODING SINGLE SONG FROM USB TO SD CARD DEVICE AND
ENCODING FROM SD CARD TO USB DEVICE
1. Set the “FUNCTION” selector to “CD” mode.
2. Plug or slot in USB / SD card device to the port.
3. Press the “USB / SD” button on the remote control to choose the desired media to play.
4. Press the “REC” button, the appliance will start recording from the beginning to the end of the song.
ENCODING ALL SONG FROM USB TO SD CARD DEVICE AND
ENCODING FROM SD CARD TO USB DEVICE
1. Set the “FUNCTION” selector to “CD” mode.
2. Plug or slot in USB / SD card device to the port.
3. Press the “USB / SD” button on the remote control to choose the desired media.
4. Press the “STOP” button to stop the auto playback.
5. Press the “REC” button, the appliance will start recording from the beginning to the end of all
song.
