ENGLISH
ENG 5
ID3 (TRACK TITLE/ALBUM/ARTIST) FUNCTION (BY REMOTE HANDSET)
PRESS THE “
DISPLAY “ BUTTON REPEATLY DURING PLAYBACK OF MP3/WMA DISC, THE SONG TITLE / ALBUM
NAME / ARTIST NAME IS BEING DISPLAYED IN ORDER. THE LCD DISPLAY (2) WILL RESUME TO NORMAL
PLAYBACK INFORMATION IF LEAVE KEY FREE.
REMARK:-
- IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, “ NO TITLE “ OR “ NO ALBUM “ OR “ NO
ARTIST “IS BEING DISPLAYED” ON DISPLAY (2).
-
NO TITLE/ALBUM NAME CAN BE RECOGNIZED IF THE INPUT FORMAT ON THE DISC/MEMORY CARD IS
NOT SUPPORTING BY THE SYSTEM
-
THE SYSTEM SUPPORT ONLY ENGLISH AND ARABIC NUMBER FOR ID3 FUNCTION
MP3 TRACK FORMAT REQUIREMENT:-
-
BIT RATE : 32 KBPS~320KBPS, SAMPLING RATE : 32KHZ, 44.1KHZ AND 48 KHZ DECODABLE
-
THE PERFORMANCE OF PLAYING MP3 DISC IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND
THE METHOD OF RECORDING. FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3-CD IS LONGER
THAN NORMAL CD DUE TO DIFFERENCE FORMAT.
z
REPEAT/RANDOM MODE
PRESS THE REPEAT/RANDOM BUTTON BEFORE OR DURING PLAYBACK, A SINGLE TRACK, SINGLE DISC OR
ALL THE TRACKS CAN BE PLAYED IN DIFFERENCE MODE AS FOLLOW:-
FOR CD/MP3 DISC
(4) RANDOM PLAY (1 DISC)
(3) REPEAT (1 DISC)
(5) OFF MODE
(1) REPEAT (1 TRACK)
(2) REPEAT (1 DISC)
INDICATOR
PLAY
MODE ON
LCD
DISPLAY
REPEAT (1 TRACK)
REPEAT (1 DISC)
ALL
REPEAT (1 DISC) + RANDOM
RAN +
ALL
RANDOM (1 DISC)
RAN
OFF
MODE
--------------
z
REPEAT PLAY
YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION.
z
RANDOM PLAY
YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION
CD/MP3 DISC PROGRAMMING
UP TO 40 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER. BEFORE USE, BE SURE TO PRESS
THE“ STOP
/
BAND ” BUTTON (8)
1. SET IN CD MODE & STOP THE CD PLAYBACK.
2.
PRESS THE “ MEMORY BUTTON (9) , “ MEM “ WILL APPEAR ON LCD DISPLAY (2) & FLASHING. MOREOVER,
IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3. SELECT A DESIRED TRACK BY PRESSING SKIP UP
OR DOWN
BUTTONS (26,12).
(FOR MP3 DISC, PRESS“ PRE-UP
“ (27) OR “PRE-DOWN “ (13) BUTTON TO SELECT THE DESIRE
FOLDER)
4. PRESS THE “ MEMORY ” BUTTON (9) TO STORE THE TRACE INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS “ PLAY/PAUSE
” BUTTON (22)
TO PLAY THE DISC IN ASSIGNED ORDER.
7. PRESS “ STOP
/
BAND ” BUTTON (8) TO TERMINATE PROGRAM PLAY. PRESS AGAIN “ STOP
/
BAND ” BUTTON (8) TO CLEAR ALL MEMORY & THE INDICATOR “ MEM “ DISAPPEAR FROM LCD DISPLAY (2)
¾
AFTER PROGRAM COMPLETE, PRESS “ SKIP UP
OR DOWN
BUTTONS (26,12) TO REVIEW THE
TRACKS BEING PROGRAMMED. PRESS “ CD STOP “ BUTTON (20) TO EXIT REVIEW MODE.
¾
THE PROGRAMMING FUNCTION ALLOW TO PROGRM 1 ENTIRE DISC ONLY.