IR1450
/ English Instruction Manual
6
When you select manual setting for wired connection, the following have to
be entered: SSID (name of access point), IP Address, subnet mask, default
gateway, preferred DNS server and alternate DNS server.
Check Network When Power On: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically search the available
AP and select the required AP.
Date & Time
Set date and time
Set time format display as 12 Hour or 24 Hour
Set date format
(YYYY/MM/DD - DD/MM/YYYY - MM/DD/YYYY)
Alarm
There are three independent alarms - 2 alarms of absolute time setting
(Alarm1 and Alarm2) and one alarm for relative time setting (Alarm NAP).
The first two alarms are similar to the normal alarm, turn on then set the
time and set it alarms every day, once or every specific day of week.
Select Alarm time. Set the respective values by the reel on the device and
switch to the next entry field. Confirm by pressing the reel.
Choose Sound to set the sound to Beep, Melody or Internet Radio. An
alarm symbol
will appear on the top of the display next to the time.
Note:
When the alarm is reached the unit connects to the Internet if the set
network is available. Therefore there may be some delay from the alarm to
the radio play. If no network is connection can be established within one
minute, the alarm will change to Melody automatically.
Press
button to stop the Alarm, if other button is pressed the Alarm
returns after 5 minutes.
When Alarm
“NAP” is set, it alarms once in 5/10/20/30/60/90/120 minutes
depending on which one you have set.
Choose Alarm Volume to configure the volume of the alarms.
Timer
Countdown timer (max. 100min)
Language
English /Deutsch / Espanol / Francais / Portugese / Nederlands / Italiano /
Pyccknn / Svenska / Norsk / Dansk / Magyar / Cesky / Slovensky / Polski /
Turkce / Suomi
Dimmer
Power saving - backlight level
Turn On - backlight level
Display
Color / Monochrome
Power
Configure to go to standby mode automatically during in the menu or/ and
Management
without Wifi signal. Choose the power management timer (5/15/30mins) to
set the duration of the radio to switch standby mode automatically when you
are not controlling it. Choose Turn off to ignore the power management
function.
