ICD2080
/ English Instruction Manual
16
•
Settings
Dynamic range compression (DRC)
If you are listening to music with a high dynamic range in a noisy environment, you may
wish to compress the audio dynamic range. This makes quiet sounds louder, and loud
sounds quieter. You can change DRC as off, low or high.
Station order
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or
Valid.
Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid
lists valid stations first, alphanumerically, then off-air stations.
FM
FM radio mode receives analogue radio from the FM band and
displays RDS (Radio Data System) information about the station
and where broadcast.
To full scan, press
“
INTRO
” remote key. The frequency display starts to run and scans the FM
full band.
To fine tune
press the “
“ or “
” remote key. The unit search in 0.05 MHz steps.
•
Preset
To store an Internet radio preset, press and hold the “
PROGRAM
” button on remote control
until the display shows the “Save preset” screen. Select one of the
40 presets to save the
current station and press “
OK
” to confirm. Or press 0 to 9 on the remote control to store the
current playing station into the preset directly.
To select a preset, press briefly the
“
PROGRAM
” button on remote control, then select one
of the listed preset stations and press “
OK
” to confirm. Or press 0 to 9 on the remote control
to directly recall the presets.
You can also store stations directly on the device by pressing the station buttons 1-3. To do
this, press and hold the corresponding station button until "saved" is shown in the display.
To recall the saved stations, press the desired station button.
•
Now playing information
While the stream is playing, the screen shows its frequency, or if RDS signal is available,
station name and any further RDS information such as program name, title and other
details. Stereo broadcasts are indicated with an icon at the bottom of the screen. To view
further information, press
“
INFO
” button on the radio.
Each time you press “
INFO
” button on the radio, another set of information is displayed,
cycling through Radio text, program
type, frequency and today’s date
.
