Soundigital EVOX2 1200.2, Руководство пользователя

Страница: 11 / 15

11
SD RLC / GAIN SETING
Set up procedure
Ø
Digital AC voltmeter;
Necessary equipament:
Ø
Media with sine wave test tone 60Hz
recorded at 0db;
Ø
Screwdriver 1/8" ( for gain set)
Ø
Disconnect the output cables from
the amplifier outputs;
Ø
Turn off all processing (bass, treble,
loudness, EQ, etc.);
Ø
Set the source unit volume to 3/4 of
full volume.
Ø
Set the source unit's fader control to
center position;
Ø
Set the variable "LOW" crossover in
500Hz and the "SUBSONIC" in 5Hz;
Ø
Use a 60 Hz sine wave
Ø
Increase the gain control until the
"CLIP" LED starts blinking;
Ø Return the gain to the limit where
the "CLIP" LED stops blinking and
remains off;
Turn the gain control all the way
Ø
down.
Download the tracks for set up in
https://sou
ndigitalusa.com/tracks-for-
set-up/
Ø O n c e y o u h a v e a d j u s t e d t h e
amplifier to its correct voltage
output, turn off the source unit and
reconnect the speaker(s)
Gain setting
POWER CLIP
LEVEL
SD REMOTE
LEVEL CONTROL*
External Level Control - SD RLC (not included)
In SD RLC, you can adjust the amplifier level
without having to lean over and adjust the gain
setting on the amplifier and can monitor the
“CLIP” LED which is also available on the
accessory.
The SD RLC is an easy-to-install external level
control accessory that allows you to tune the
level of SOUNDIGITAL amplifiers that have
remote level control.