SoundFreaq Sound Spot SFQ-07, Руководство пользователя, Страница: 10 / 18

12
Playing back via Bluetooth
Establishing a Bluetooth
Connection
Notes:
y
Before establishing the Bluetooth
connection, make sure the
AUX IN jack
is not inserted by AUX cable.
y
If your mobile phone supports A2DP,
AVRCP profiles, its music will play
through the system.
y
You can make a Bluetooth connection
with a mobile phone, an
iPhone/iPad/iPod touch or any other
Bluetooth-enabled devices.
1. Press the button to power on the
system.
y
The LED indicator on top panel
illuminates and blinks in white light.
2. Tap PAIR button on top of system to put
in pairing mode.
y
The indicator starts blinking at a fast rate.
y
If you hold the PAIR button for more than
2 seconds during the process of pairing,
the operation will be cancelled.
3. During this period, you can operate the
mobile phone, iPad or Bluetooth-enabled
device to pair with the system within a 33
feet (10m) range.
y
Please check the user manual of the
iPad or Bluetooth-enabled device with
which you are initiating pair to learn
about Bluetooth connection with any
other devices.
4. Once the system is detected and its
name Sound Spot appears on the
display of your Bluetooth-enabled device,
key in the default password
1234 if a
prompt requests it.
y
The LED indicator on top panel starts
blinking quickly to indicate that the
system and your device have entered
into the connection mode.
y
After a Bluetooth connection is
established successfully, the LED
indicator will remain on in white light.
5. Select the desired music and press Play
button on your device. The system
automatically starts playing back the
music.
y
Try again above steps 2 to 4 if the pair
indicator turns solid after blinking for 3
minutes, the pair was unsuccessful.
Using Multiple Bluetooth Devices
Only one device can be used at a time, but
you can switch between different Bluetooth
devices.
Make sure each device you want to use has
already been paired, to switch devices:
1. On Sound Spot, tap PAIR button.
2. On Bluetooth device, select the
connection to Sound Spot.
This device is now the connected device to
Sound Spot, (the previous connected device
is now disconnected). Repeat those steps to
switch the connected device again.
Notes:
y
If the system has no sound output,
please check if the volume level of your
Bluetooth device connected to the
system is set to the minimum, or the
Bluetooth device is muted.
y
Ensure that the audio cable has been
removed from the
AUX IN jack.