SoundCraft Si Compact Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 60

SoundCraft Si Compact Скачать руководство пользователя страница 37

37

Soundcraft Si Compact User Guide 0311

INPUTS MENU

The INPUTS menu provides information to all parameters and functions concerning system
inputs.

NOTE: The INPUTS button is greyed-out and not accessible unless an input channel is
SELected.

Input Name

:

The name of the currently SELected input; press the SCROLL/ADJUST
encoder to access the QWERTY keyboard to edit the name.

Type

:

Sets the channel as either Mono or Linked

NOTE: Channels may be lined as an odd/even pair.

Direct Out Pre/Post

: Allows the pick-up point of the direct out to be set as either pre or

post high pass filter.

NOTE: Has no function and is not available unless a Direct Out
patch is active.

Input Patch

:

Displays the source patched to the channel; see PATCHING for details
of the system patching functionality.

Direct Out Patch

:

Displays the destination patch of the channel direct out function; see
PATCHING for details of the system patching functionality.

«
...
35
36
37
38
39
...
»

Содержание Si Compact





























































Отзывы:

Нет отзывов