SoundCraft MINI STAGEBOX 32, Руководство пользователя и инструкция по установке

Страница: 11 / 20

Soundcraft Mini Stagebox 32 User/Installation Guide 0813 11
MOUNTING MINI STAGEBOX 32
When installed in a 19" rack mount ensure all four mounting holes are used.
If mounted with other equipment that may get hot (~power requirement of
‘other’ equipment >100W) it is recommended to leave a 1U gap between the
equipment.
In all scenarios, the air vents must not be obstructed and the Mini
Stagebox 32 must not be mounted in a fully sealed enclosure.
MADI LINK CARD
This card provides the audio and control connections to the console through
either a Cat-5 or an Optical-fibre MADI link. The corresponding MADI card
in the console transmits the clock for the Mini Stagebox 32 down the MADI
stream.
The second (AUX) connector on the card can be used to provide a redundant
connection to the console,
The MADI HD card indicates its clock status with the ‘LOCK’ LED on the card.
It is possible to connect two different consoles to the MAIN and AUX
ports, and provide a split of the mic inputs to the two consoles. However,
be aware when using the Cat5 version that the console which has control
of the preamp gains, and is able to send signals to the Mini Stagebox
(MSB) 32 outputs, will be the first active console to be connected to the
MSB or the first console to be switched on if both are already connected.
This means that the gain control and output routing can switch from
one console to the other, depending on power-up order or connection
sequence. Consequently we do not recommend operation with two
consoles with the Cat5 version.
With the optical version, this situation can be avoided by leaving the
MADI IN optical port unconnected on whichever port (MAIN or AUX) that
the 'slave' console is connected to. (See hook-up diagram on page 14).