05
06
EN
EN
Flashing White
Bluetooth Pairing Mode
Solid White
Connected to a device
× 1
Play / Pause
× 2
Play Next Song
× 1
Answer Call / End Call
1s
Reject Call / Switch between a call on hold and an active call
2
End current call and answer incoming call / End current call and
switch to call on hold
1s
Switch audio source between speaker and phone
2
Put current call on hold and answer incoming call
Volume Up / Down
Screen display light
Solid White
On a Call
Flashing White
Incoming Call
When turned on, Soundcore Wakey will automatically connect to the
last connected device if available. If not, press the Bluetooth pairing
button to activate pairing mode.
To pair a different device, press and hold the Bluetooth button for 2
seconds to re-enter pairing mode. Then repeat the pairing steps.
Having connection problems? Remove Soundcore Wakey from your
device’s Bluetooth history and ensure it’s less than 3 feet away.
Then try pairing again. To get the best sound quality, make sure
there is a clear line of sight between the connected device and your
speaker.
b. AUX-In mode
AUX
AUX
POWERED BY ANKER
