Soundchoice PROAudio RWP5, Руководство пользователя

Страница: 6 / 8

4
Connections
Connections/Operations
RWP5 should only be connected to MA Series mixer amplifier .
RJ45 PIN assign is as follows.
[ Figure 2.1 UTP CAT-5 cable connection ]
1
.
+ 15 Volts
2
.
Ground
3
.
- 15 Volts
4
.
Data -
5
.
Data +
6
.
Ground
7
.
8
.
Signal -
Operations
1.Press zone selection button Z1 to Z5 for individual zone announcement.
3.“CHIME” button plays pre-announcement chime.
2.The selected zone LED will turn on. If you want to remove selected zone, press same
zone button again.
4.Press and hold the “TALK” button while you announce to selected zone.
5.All of zone selection buttons don't operate when the locking switch is in the “LOCK” position.
6.Output level can be controlled by rear volume.