When you wish to use two Soundcast systems at the
same time, leave one system on Channel 1 and move
the selector switch to on the second system to Channel
2 or 3. Please remember that both the Transmitter and
Receiver must set on the same Channel. When set this
way, the two systems will not conflict with each other
and you can use two different iPods operating two
different audio systems in the same house.
The Channel selector switch will also allow you to
eliminate the signal from a neighbor’s Soundcast
system. If you live in an apartment building and find
that you receive music from another Soundcast
system, simply move the selector switches on your
Soundcast Transmitter and Receiver to a different
Channel and the unwanted signal will stop being
received.
Should you have any additional questions concerning the
installation or use of your Soundcast products, please
contact Soundcast via E-mail at
.
Information to User
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the
limits for Class B Digital Device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures.
• Reorient or relocate the receiver or transmitter
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for
help
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Soundcast Systems
San Diego, California
US only 1-800-722-1293
www.soundcastsystems.com
➤
Channel selector, 1, 2, or 3
