Soundbarrier PC10MA, Руководство пользователя

Страница: 7 / 12

Turning the power on
First, turn on the power to any connected devices, then turn the PC8MA/PC10MA power on.
If you’ve connected powered speakers to the mixer, turn on the power of the mixer first, then the powered speakers.
CAUTION
To avoid any loud, unexpected noise from the speakers, first turn on the power to those connected devices that are
closest the sound source.
Example:
Sound source (CD player or instrument) →PC8MA/PC10MA→ (Power amplifier).
When turning off the power to the system, reverse the order described above.
Quick Guide Quick Guide
Getting sound out of the system
Using the included speakers, set up the system and try it out.
Connect the included speakers and your instruments to the mixer.
Connect the included speakers to the SPEAKERS L/R jack. Connect the sources (guitar, other instruments) to the input jacks. For
details, see “Connection Example” .
CAUTION
Before connecting any devices, make sure to turn off the power for all devices (including microphones). Also, before turning the power on or off,
set the volume levels on all devices to minimum.
NOTE:
For best results when connecting an electric guitar or bass guitar to the mixer, use a direct box, preamp (guitar amp), or amp simulator.
Set the mixer’s LEVEL controls and MASTER LEVEL control to the minimum (zero).
Depending on the device used, set the MIC/LINE switch to MIC
（ ）
or LINE
（ ）
as appropriate.
For low-level signals (such as that of microphones), set the switch to the MIC
（ ）
position.
For high-level signals (such as keyboard instruments and audio equipment), set the switch to the LINE
（ ）
position.
NOTE:
When using a condenser microphone, set the PHANTOM switch to ON.
6
While playing your instrument or singing into the microphone, adjust the LEVEL
control of the corresponding channel.
Adjust the LEVEL Control of the corresponding channel so that the “0” LED lights up momentarily.