PAINTING INSTRUCTIONS
The grids can be painted to match your walls, making the speaker even less noticeable. However,
great care should be taken not to clog the holes, as this will greatly reduce the sound quality of the
speakers.
If you plan on paint your grids, we recommend that it be done prior to installation. The scrim cloth
backing must be removed prior to painting the grids. The surface should be cleaned with a light
solvent to remove any dust or residue. Soundavo recommends a light spray-painting using 5 parts
thinning agent to 1 part paint. Do not paint the grid while they are attached to the speaker, before
proceeding with installation. Ensure that the holes in the grille are not blocked by paint.
• Remove the center portion of the cardboard
installation template/paint mask. The central
portion is the paint mask, while the outer
portion is the installation template.
• Completely remove the grille by inserting a
paper clip or the included grille removal tool
into one of the holes and pulling to lift it off
the frame.
• Remove the foam insert and set it aside.
Perform the following steps to safely paint them without damaging the speaker.
• Insert the paint mask, covering the speaker
while leaving the frame exposed.
• Paint the speaker frame and grille. It is best to
use spray paint to avoid paint clogging the
holes in the grille.
• Allow the paint to completely dry
10
