REAR PANEL INSTRUCTION
1
2
3
4
5
6
7
8
9
10
11
12
13
1. MP3 Player
MODE
Long press to turn on/off the MP3 module;
Short press to Interchange between USB/SD/Bluetooth mode
/ TWS
Play or Pause / Long press for TWS bluetooth pairing (To pair the other speaker)
Repeat
Previous Song / Long press for rewinding
Next Song / Long press for fast-forwarding
1/4" / XLR combo input. (Mic/Line signal switchable)
2. Channel 1 Input:
Switch to select Mic or Line signal for Channel 1.
3. MIC/LINE Switch:
To adjust the input level of channel 1.
4. LEVEL 1:
1/4" / XLR combo input. (Line signal only)
5. Channel 2 Input:
To adjust the input level of channel 2 or Mp3 player.
6. LEVEL 2:
XLR signal output. (Mixed out)
7. Line Output:
Adjust the overall volume of the system.
8. MASTER VOLUME:
There are 3 different EQ setting (Live/Speech/Music), push this button to select one
9. DSP (EQ Preset):
according to your application.
10. LED Indicator:
LIVE LED: Illuminated when 'LIVE' mode EQ is selected.
SPEECH LED: Illuminated when 'SPEECH' mode EQ is selected.
MUSIC LED: Illuminated when 'MUSIC' mode EQ is selected.
POWER LED: Illuminated when unit is on.
LIMIT LED: Lights up when the amplifier is near clipping. An occasional flickering is acceptable
If LED is lit continuously adjust the level control and reduce the output level of connected sources.
Failure to do so may lead to premature failure of your speaker.
This switch is supplied for moving the unit from 115V (U.S. standard) to 230V
11. Voltage Selection:
(European standard). The switch needs to be set on the proper voltage for your area.
This receptacle is for connecting the IEC power cable. It’s important to supply the
12. IEC Input:
proper AC line voltage to the unit. Do not connect to intermittent or faulty power.
To turn on/off the unit.
13. Power Switch:
REAR PANEL INSTRUCTION
