Sound Storm SD354, Руководство пользователя, Страница: 8 / 26

E - 6
4. ELECTRICAL CONNECTION
a. Make sure your car battery is a 12 volt (6 filler caps) negative ground system (if not, a
converter will be necessary).
b. Before starting wiring connections, disconnect the power supply by removing the fuse from
the fuse box.
c. Connect the power wire to one of the extra terminals of the fuse box.
d.
Connect the black ground wire to a metal part of the car. It is important to make good contact.
e. Make other wiring connections as shown.
FUSE
Fuse Replacement:
To replace the fuse, pull out the blown fuse
from the socket. Insert a new one with same rating
(CAR UNIT BACK SIDE)
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
RESET BUTTON
RED
WHITE
(REAR)
RCA OUTPUT
RED
WHITE
(FRONT)
RCA OUTPUT
ANTENNA
CONNECTOR
GREY
BLACK
VIDEO OUT (1)/(2)
AUDIO IN RED
WHITE
YELLOW
YELLOW
VIDEO IN
YELLOW
REVERSE VIDEO IN
YELLOW
GREY
GREY / BLACK
VIOLET
VIOLET / BLACK
FRONT
RIGHT
SPEAKER
REAR
RIGHT
SPEAKER
WHITE
WHITE / BLACK
GREEN
GREEN/BLACK
FRONT
LEFT
SPEAKER
REAR
LEFT
SPEAKER
MAIN UNIT
BLUE
AUTO ANT.
SUB-WOOFER
GOUND ( )
BLUE
(+)
12V+
SWITCHED
12V+
CONSTANT
YELLOW
(FUSED)
BLACK
RED
GREY
PINK
PARKING BRAKE(-)
ORANGE
R12V)
OVERRIDE WIRE
f. If your car does not have ISO connector, you can purchase it from car accessory shops.
Notes: INCORRECT WIRING OR OPERATION WILL VOID THE WARRANTY OF THIS UNIT.
The RESET button is located on the main unit (as shown on the diagram). Press it vertically
with a ballpoint pen or metal object to activate it. The reset button should be activated for the
following reasons:
Note: If you press the RESET button, and the unit still cannot function normally, please use a
cotton swab soaked in isopropyl alcohol to clean the socket on the back of the control panel.