Sound Sculpture Switchblade 8B, Руководство пользователя

Страница: 18 / 22

17
If a dual footswitch is used, then the second switch will increment to the next bank. Only those banks that have
presets loaded into them are called up.
The preset manager can be used simultaneously with a MIDI controller. The MIDI controller will always bypass the preset
manager and call presets up directly, The footswitch on the other hand always goes through the preset manager to find the
presets to load.
To use the Preset Manager:
1. The preset manager can be turned on or off. If turned off, then the footswitch automatically becomes a method of
activating the REMOTE ADJUST feature (see REMOTE ADJUST section). To turn off the Preset Manager, Press the
SELECT switch to move the cursor under the "BANK" value and press the DOWN switch until the display changes to PR
MNGR/OFF.
2. If the Preset Manager is off and you wish to turn it on, press the UP/DOIT switch. If the Preset Manager is turned on then
the REMOTE ADJUST feature is disabled and the footswitch may be used to call up presets through the Preset Manager.
3. The Preset Manager menu allows for 3 types of clearing operations:
* If the cursor is under the "BANK" value, pressing the DOWN and UP/DOIT switches together will clear out the entire
Preset Manager (that is, all presets from all banks) and reset the Bank number and Item number to 1.
* If the cursor is under the "ITEM" value, pressing the DOWN and UP/DOIT switch together will only clear out the Bank
that is presently shown.
* If the cursor is under the "PRST" selection, pressing the DOWN and UP/DOIT switch together will either reset the preset
number to the first preset for this item only or else it will remove the preset entirely from the selected item depending of if the
item shown is the last item in the bank that has a preset loaded into it or not.
4. To load or change presets in the Preset Manager, move the cursor under the bank number and scroll to the bank number that
you wish to load or change. NOTE: YOU WILL NOT BE ABLE TO SCROLL PAST A BANK NUMBER THAT DOES
NOT HAVE ANY PRESETS AT ALL LOADED INTO IT. LIKEWISE, YOU CANNOT ERASE ALL THE PRESETS
FROM A BANK IF THERE IS A BANK AFTER IT THAT STILL HAS PRESETS LOADED INTO IT. This guarantees that
there will never be an empty bank in between banks that have presets loaded into them. You will always be able to tell if you
are at the last bank loaded if an asterisk (*) appears before the bank number.
5. When you have found the bank you want to load or change, move the cursor under the item number and scroll to the item
that you wish AN ITEM THAT DOES NOT HAVE A PRESET LOADED INTO IT. YOU ALSO WILL NOT BE ABLE TO
REMOVE A PRESET FROM AN ITEM UNLESS IT IS THE LAST ITEM IN A BANK THAT HAS A PRESET LOADED.
This guarantees that presets are loaded into consecutive items and that there is never an empty item between two loaded items.
You will always be able to tell if you are at the last item loaded if an asterisk (*) appears before the item number.
6. When you are at the item you wish to load or change, move the cursor under "PRST" and scroll to the preset you wish to
load into that bank/item combination.
7. When done loading all banks and items, press the mode switch to go back to the PLAY MODE, all changes are
automatically saved.