Sound Sculpture MidiUp, Руководство пользователя

Страница: 6 / 12

6
assigned to MIDI Controller value 13, then you can change the echo time by transmitting a Controller 13
over channel 1. As the Value byte in the message varies, so does the echo time.
SETUP USING A VOLUME PEDAL
Using the MidiUp with a standard volume pedal is very simple. Just connect a standard guitar cable
between the volume pedal output and the MidiUp audio input. Nothing is connected to the input of the
volume pedal since the pedal is only used to control your effects, not to control the audio output of the
guitar. Also nothing is connected to the MidiUp audio out since the unit is not passing a signal. The
instrument itself is connected directly to your effects. This way, all parameters are controlled by the foot
pedal.
SETUP USING A USER INSTALLED POT
GL
GL
To Amp
MIDI Foot Pedal
MidiUp
Effects Processors
Guitar
MIDI Cable
Audio Cable
Volume Pedal
GL
GL
To Amp
MIDI Foot Pedal
MidiUp
Effects Processors
Guitar with Pot Installed
MIDI Cable
Audio Cable