7
FRONT PANNEL DESCRIPTION
10. Output attenuator knob. Adjusts the attenuation of the signal after the input stage and equalizer.
The signal adjusted by the attenuator signal is fed directly to the output buffer.
11. Impedance selector switch. Switches the microphone input impedance from 1200 ohms to 300.
Switching to lower impedance is indicated by the yellow LED above the switch.
12. Equalizer block switch. Switching the equalizer on is indicated by the LED above. This switch
operates globally in the entire equalizer block regardless of the settings for each band in the equalizer.
It can be used to compare the sound before and after the equalization is introduced (bypass).
13. Power switch.
14. Phantom power 48V. Switching the phantom power on is indicated by the red LED.
15. Signal phase switch.
Rev. C
10
11
12
13
14
15
