WARNING
05
1.Read these instructions. Keep these instructions. Heed all warnings.
Follow all instructions.
2. Pay attention to insert the connector into the device completely to
avoid contact NG (no sound or staccato).
3. If the head of the microphone is covered by hand or brought close to
the speaker, a howling sound may be generated. To prevent this, first
decrease the volume, then place the microphone so that it is not
pointed to the speaker and that there is a sufficient distance between
the microphone and speaker.
4. It is important to keep foreign particles out of the grill and the
windscreen because they may alter the frequency response of the
microphone. The grill shall be periodically cleaned using warm, soapy
water, rinsed with plain water and let dry before replacing.
5. Keep the microphone far from contact with strong magnetic fields,
otherwise the permanent magnet will lose its magnetism, thus
reducing the headphone sensitivity and affect the sound quality.
6. Avoid dropping or hitting.
7. Insert the XLR connector into the microphone. If necessary, rotate
the connector to align the key on the connector and the groove in the
microphone. Push the connector into the microphone until it clicks.
8 Do not pull the cable strongly to avoid cable broken.
.
9. Do not place near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including 8-amplifiers) that produce heat.
10. Only use attachents/accessories specified by the manufacturer.
11. Do not disassemble the microphone or modify the inside to avoid
malfunction. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any
way, such as liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
