background image

 

 

Note: Enable channel 4 with Mode DIP switch no. 4 on. 

0 - 5 
6 - 42 
43 - 85 
86 - 128 
129 - 171 
172 - 214 
215 - 255 

0 - 1 
2 - 16 
16 - 33 
33 - 50 
50 - 67 
67 - 84 
84 - 
100 

Special effects

 

No effect 
Ramp up 
Ramp down 
Ramp up-down 
Random 
Lightning 
Spikes

 

GENERAL 

 

 

 

If any foreign objects enter the instrument, please contact your dealer or 

an authorized 

SOUNDSATION

 center. 

 

The 

serial number

, electrical features and international standards are 

printed on a label located in the bottom of the instrument. 

 

In case of problems remember to give the serial number to the 

responsible of the technical assistance. 

To prevent possible damages read the following list of actions: 

- Do not place the product in wet or dirty environments.   
- Do not remove the protective coverings. 
-Do not cover any of the products ventilation holes.   
- Air must circulate freely around the product.   
- Do not set the product on a surface with excessive vibration.   
- Do not expose the product to high electro-magnetic interference.   
- Do not expose the product to heat, cold, wet in improper way in 
respect to its IP grade 
- Do not leave the product in direct sunlight.   
- Do not expose the product to electrostatic forces.   
- Do not place items with flames, such as candles or lighters,  on 
the product.   
- Do not place the product on anything containing water or other 
fluids. 

Содержание Lightblaster 3000 DMX

Страница 1: ...r cooperation in the correct disposal of this product will contribute to the effective usage of natural resources For more information about where you can drop off your waste equipment for recycling please contact your local city office waste authority approved WEEE scheme or your household waste disposal service Contents and images shown on this manual can be changed without any notice Please vis...

Страница 2: ...ase as shown on your purchase receipt The following cases components are not covered from the above warranty Any accessories supplied with the product Improper use Fault due to wear and tear Any modification of the product effected by the user or a third party SOUNDSATION shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at SOUNDSATION s discre...

Страница 3: ...sible of the technical assistance To prevent possible damages read the following list of actions Do not place the product in wet or dirty environments Do not remove the protective coverings Do not cover any of the products ventilation holes Air must circulate freely around the product Do not set the product on a surface with excessive vibration Do not expose the product to high electro magnetic in...

Страница 4: ...0 V 50Hz Power 3000W Peak current consumption 33 A Typical current consumption MAX 15 high power mode 8 A FUSES Primary fuse 20AT 220V 50Hz CONSTRUCTION Housing steel Finish electrostatic powder coating INSTALLATION Minimum distance to combustible materials 0 5m 20 in Minimum distance to illuminated surfaces 1m 39 in Minimum clearance around fan and air vents 0 1m 4 in 1 Channel DMX mode DMX Chann...

Отзывы: