background image

5

3.  Turn power switch ON to the “1” position

(plug in power cord for AC operation).

 

Observe LED indicators to confirm battery level and power.

Battery Power

: The green light indicates the battery is at or 

near full charge and ready to use. The yellow light means 30-60% 
usage remains, and red means less than 30% remains and that 
the battery should be charged before use (see below).

AC Power

: When plugged into an AC power outlet, the green 

LED will stay on constantly as the system is being powered from the AC line 
(not the battery). Occasionally, when playing loudly, the LED’s may flicker 
between green and yellow - this is normal.

4.  Adjust the volume level.

Increase the volume of the input being used to desired level (be sure the 
microphone or input source is turned on!)

Charging the battery.

                                                                                                                                                                                                  

While it is not harmful to store your VM-2 with a partially discharged battery, 
charging after each use will ensure maximum operating 
time for your next event.  We also recommend charging if 
the battery has been completely run down or before plac-
ing into storage.  Optimum charging is achieved when 
the battery is charged between 0 and 40 degrees centigrade (32-104 Deg F).  
If the outdoor environment is unusually warm or cold, bring the unit indoors 
before charging.

Charging the battery.

Turn the system “off” and plug the cord into a standard AC outlet to charge 
the battery. The system automatically begins charging, indicated by the yel-
low charging LED.  When the green full LED illuminates, the battery is fully 
charged and the unit is ready for use or storage. 

The typical time to recharge an empty battery is 7 hours.

12

 

Dual wireless system set-up.

Follow these steps to set-up a Sound Machine with two wireless systems:

1.  Turn the sound system “on”, and turn all transmitters “off”.

2.  Perform Automatic Group Scan on the first receiver (see page 11).

3.  Turn the first transmitter “on.”

4.  Perform Transmitter Setup to match transmitter to receiver (see page 11).

Leave the first transmitter on. Repeat for steps 2-4 for the second system 
   

 

 

 

 

 

 

 

 

   

Manual Frequency Selection Receiver

To activate the newly-selected group or channel, simply wait until the number 
stops flashing.

 

Receiver locking feature.

With receiver on, simultaneously hold the group and channel button.  The dis-
play flashes rapidly.  To unlock, repeat.

•  When locked, the display flashes rapidly if any key is pressed.

•  To unlock the channel: Hold the channel button until 

both

 numbers flash 

(approximately 5 seconds).

1

0

power

charging

full

Group (letter)

If channel needs to be changed, follow the 

same procedure using the 

channel

 button 

instead of the 

group

 button.

2. While the display is flashing, press the 

group

 button again to advance to the desired 

group setting.

Channel (number)

1. Press and release the 

group

 button to 

activiate the display.  Press the 

group

 button 

again and the display flahes.

Содержание vm-2









Отзывы: