USB Playback
(MP3 songs recorded to USB key)
1. Insert a USB memory key into the unit.
Note: This is not an iPod port!
2. Press the
CD
/
USB
button .
• To start play from a folder, press the
FOLDER SKIP
buttons until the folder
you want appears. During playback, use the
FOLDER SKIP UP
and
FOLDER
SKIP DOWN
buttons to move to other folders.
• Press the
PLAY
/
PAUSE
button to play the first song of the album/folder.
!! Note: Be sure to turn the CD/MP3 player off before removing the USB key.
Play Mode
(note: accessible only by play
MODE BUTTON
on remote control)
Press
PLAY MODE
key one or more times to select one of the following modes:
Play All Random, Repeat Track, Repeat Folder (MP3 mode only) Repeat All,
Random Repeat and Play All.
note: for more remote control features, see the back page.
Program Play
(note: programming feature requires the remote control)
To program songs/tracks on CD
1. Insert CD. Press
PROG
key on remote control to enter program mode.
2. Enter desired song using keys 0 - 9, followed by the
PROG
key. Repeat
until all songs are programmed (display will return to normal after approxi-
mately 10 seconds).
3. To play programmed songs, press
PROG
followed by
PLAY
.
(note: to play songs in normal sequence, press
PLAY
only.)
4. To clear programmed songs, press
PROG
followed by
STOP
.
To program MP3 songs/tracks recorded to CD or USB key
1. Insert CD with MP3 songs or USB key with MP3 songs.
2. Press
PROG
key on remote and enter desired folder using keys 0 - 9,
press
PROG
again and enter desired track. Repeat until all songs are
programmed, press
PROG
key when complete (display will return to normal
after approximately 10 seconds).
3. To play programmed songs, press
PROG
followed by
PLAY
.
(note: to play songs in normal sequence, press
PLAY
only.)
4. To clear programmed songs, press
PROG
followed by
STOP
.
5. To view folder description, press
DISPLAY
key on remote.
Pitch Control
For normal speed, turn the
PITCH
knob to detent (12:00) position. To slow
down speed of playback, turn knob to left; to speed up, turn knob to right.
CD/USB
Built-in CD/MP3-USB Player with Pitch Control
This addendum is for Sound Systems with OPT-300, a built-in CD/MP3 player with
pitch control. If your CD player does not look like the image below, contact Sound
Projections for the correct instructions for your player.
Operating the CD Player
1. Turn the sound system’s main power “on.”
2. Push the
POWER
/
VOL
button on the CD player to activate it (the LCD panel
will light).
3. Gently push a CD into slot until auto-load mechanism responds
Note
: Do not force CD into player, as damage may result.
!!
Caution
: This player does not accept 8-cm diameter CD's.
CD Playback
1. Press the
PLAY
/
PAUSE
button
.
2. Adjust the volume control knob on the CD player.
• To pause, press the
PLAY
/
PAUSE
button; press again to resume play.
• To skip forward during play or program mode press
SKIP
, or press
SKIP
to skip back to the previous song.
If song is playing, press and hold
SKIP
buttons for fast cue (search).
• While CD is playing, press the
STOP
/
EJECT
button once to stop playback,
and press
STOP
/
EJECT
again to eject the CD.
MP3 Playback
(MP3 songs recorded to CD)
• To start play from a folder, press the
FOLDER SKIP
buttons until the folder
you want appears. During playback, use the
FOLDER SKIP UP
and
FOLDER
SKIP DOWN
buttons to move to other folders.
• Press the
PLAY
/
PAUSE
button to play the first song of the folder.
T
PITCH
POWER/VOL
SKIP
MODE
FOLDER SKIP
CD/USB
IR
PLAY
PAUSE
STOP
EJECT
2
3
