Sound Pro NDS-1503, Инструкция по эксплуатации

Страница: 7 / 9

1. The unit is a battery powered PA loudspeaker. It
Be sure to
completely charge the battery prior to first use to maximize the battery's
operational life span. The battery takes approximately
ours to charge
fully. The unit will begin charging automatically when the power cord is
connected to a power source and the Power Switch is set to ON/OFF.
When connected to a power source, the unit will play while also charging
the battery.
2. Disconnect the power cable when the battery is fully charged.
3. A fully charged battery can provide up to 3 hours of play time under
standard conditions and use.
4. Always set the Power Switch to OFF when the unit is not in use to prevent
the battery from being completely drained.
6. To maintain the health of the battery when the unit is not in use, charge
the battery fully every 2 months.
works with direct AC
power or with the supplied battery pack (DC 7.4V, 1.8Ah).
5. The LED indicator will light red when the battery is being charged. The
indicator will light green when the battery is fully charged.
3 h
6
PAIRING A BLUETOOTH DEVICE
Use Bluetooth mode to stream music from a Bluetooth enabled player (e.g., smart-
phone or tablet device). A device must be paired with the unit before using them
together for the first time.
1. Make sure Bluetooth is enabled on your device and that it is next to the unit
before attempting to pair it.
2. Turn on the unit and set it to Bluetooth mode (press the MODE button). The unit
will automatically enter pairing mode and the LED indicator will flash.
3. Use your device to search for nearby Bluetooth devices. The boombox will be
listed as “SOUND PRO NDS-1503.” (This function is usually in the Bluetooth
settings menu; refer to your device’s instruction manual to learn more.)
4. Select "SOUND PRO NDS-1503" from the list of found/available devices. If your
device asks for a passcode, use “0000” to complete the pairing process.
The LED indicator will light steady when it is paired. You can now start playback on
the device to start streaming music to the speaker.
If you are having trouble pairing with the unit, try unpairing any previous devices by
pressing and holding the button.