Sound Performance Lab Kultube 2049, Руководство пользователя

Страница: 11 / 24

11
Controls
Control Elements
THRESHOLD
The Threshold control determines the compressor threshold value. The value
scale for the THRESHOLD control indicates the level in dBu. Turning fully CCW
provides no control, and fully CW provides compression starting at a level of
approx. –40 dBu.
RATIO
The RATIO control is used to set the ratio between the original signal and the
compressed signal. A ratio of 1:4 means that a level increase of 4 dB on the
input results in an output change of 1 dB. The more the control is turned CW,
the more ‘dense’ the sound becomes. Turned fully CW the unit works as a
limiter.
ATTACK
The Attack control determines the time the compressor needs to achieve
a reduction of 63% at a level jump of 20 dB. When turned fully CCW this
time is approx. 100 ms, and turned fully CW the time is approx. 0.9 s. When
Progressive Time Control is enabled the effect is somewhat different: now you
are determining the degree to which the fast signal jumps are compressed,
whereas the attack time is automatically optimized (adapted). Progressive
Time Control mode is often advantageous , since the attack time is only as
fast as is necessary for the respective signal. The result is considerably unob-
trusive and thus more musical compression behavior without undesired side-
effects.
RELEASE
The RELEASE control is used to set the time the compressor needs to back off
by 63% to the original value. Turned fully CCW this time is approx. 30 ms, or
approx. 2 s for fully CW. If Progressive Time Control is enabled, the Release
control is used to set the average value to which the automatic release time
is set back. The more the control is turned CW, the slower the averaging. This
gives much better results than with the conventional method of rigid release
time control especially with complex musical material.
MAKE UP GAIN
The MAKE UP GAIN controller is used to change the output level within a
range of approx. –22 dB to +22 dB. For compression you thus set the value
that is indicated on the VU meter in GAIN REDUCT MODE. Actuating the
ACTIVE switch makes the volume increase perceptible. With the built-in digital
converter option the MAKE UP GAIN control is also used to set the level for
the converter. In DE-COMP mode the MAKE UP GAIN control works exactly in
reverse: Turning fully CW results in a damping of –22 dB, whereas fully CCW
results in a gain of +22 dB.