Sound Oasis®
sleep better. feel better. live better
®
16
17
Using as a Speakerphone
Your BST-80-20 can function as a Bluetooth speakerphone to add extra
sound fidelity and convenience to your phone call.
Please follow these steps to use as a speakerphone:
1. Press and hold the POWER button down for 3 seconds.
2. Press the MODE button again to activate the Bluetooth mode. You
will hear a Bluetooth streaming mode “blip” and see the Bluetooth
LED flash.
3. Make sure your BST-80-20 is Bluetooth paired with your smartphone.
4. Start your call.
5. You will be able to speak into the BST-80-20 (please speak towards the
MICROPHONE) and hear your call through the BST-80-20 speaker. End
the call on your smartphone or by pressing the button. Repeat
the call on your smartphone or by pressing and holding the
button on your BST-80-20. Adjust the volume during the call via the
Last Sound/Volume Down or Next Sound/Volume Up button.
Note:
If you are streaming sounds/music to your BST-80-20 and you
receive a call on your smartphone, you can stop the sounds/music and
answer the call by pressing the ON/OFF button. To hang up the call,
press the ON/OFF button again.
Disposal
Dispose of all product parts in accordance with local regulations. If
in doubt, please consult your local authorities.
The battery in the BST-80-20 needs to be recycled. Do not
attempt to replace the built-in battery yourself.
The crossed-out wheeled bin means that within the European Union the product
must be taken to separate collection at the product end-of-life. Do not dispose of
these products as unsorted municipal waste.
FCC Information
This equipment has been tested and found to comply with the limits for a class B
digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
