Sound Oasis®
sleep better. feel better. live better
®
10
11
Listening To Sounds/Music From The Micro SD Card
You can enjoy sounds or music from your BST-400 from the included
preloaded MICRO SD CARD.
Playing Sounds from the Built-In Micro SD Card
Your BST-400 includes a MICRO SD CARD that contains preloaded Sound
Oasis sounds.
To play sounds/music from the built-in MICRO SD CARD, please
follow these steps:
1. Press and hold the POWER button down for 3 seconds.
2. Your BST-400 will automatically start playing the first sound on the Sound
Oasis MICRO SD CARD.
3. Press the - button to increase or decrease volume.
4. Press the >II button to pause and resume playback.
5. Press the SOUNDS > button to skip to the next sound track.
6. Press the < SOUNDS button to repeat the sound track.
Please note:
• For the exact sounds preloaded on your MICRO SD SOUND CARD, please
refer to the separate sound listing sheet included with your BST-400.
• Each preloaded Sound Oasis sound is 8 hours long so it plays throughout
the night. After playing through the 8 hour sound track, your BST-400
will automatically replay the same sound track.
Playing Bluetooth Streamed Sounds
Your BST-400 can also operate as a Bluetooth speaker so you can stream
new sounds/music to your BST-400.
To stream sounds/music from your Bluetooth enabled device (e.g.
your mobile phone, music player, PC/laptop) to your BST-400,
please follow these steps:
1. Press and hold the POWER button down for 3 seconds.
2. Your BST-400 will play sounds from your MICRO SD CARD by default.
Press the MODE button to activate the Bluetooth mode. Your
BST-400 will then attempt to reconnect to the last connected device.
If there are no paired devices, the BST-400 becomes discoverable (see
Playing Bluetooth Streamed Sounds section of this manual).
3. On your Bluetooth enabled device, turn Bluetooth on, locate the
Bluetooth device list and select the device named BST-400. Pair your
BST-400 with your Bluetooth enabled device.
4. The Bluetooth LED will light up on your BST-400 and you will hear a
Bluetooth pairing mode “blip” to indicate that you are in the
Bluetooth streaming mode.
5. Press play on your Bluetooth device to play the streamed music/sound
if the music/sound does not automatically start playing.
6. Press the - button to increase or decrease volume.
7. Press the >II button to pause and resume playback.
8. Press the SOUNDS > button to skip to the next sound track on your
music list.
9. Press the < SOUNDS button to repeat the sound track playback.
Please note:
• You can only pair one Bluetooth device at a time.
• If pairing fails, please turn your BST-400 off and then on again and
retry pairing.
