Sound Oasis®
sleep better. feel better. live better
Button
Description
SD
CHG
Microphone
INPUT
MICRO SD
• Amber LED indicates sound will play from the micro SD card.
• The solid amber light will turn off after about 10 seconds so
the light does not interfere with your sleep.
• Red LED indicates that your BST-100B is charging.
• The red LED will stay lit until your BST-100B is fully charged –
then the LED will dim to a very dim level.
• Insert an optional audio cable with 1/8” (3.5 mm) plugs to
play music from an external device (e.g. iPhone®, iPod®,
MP3 player or CD player) through the unit’s speaker system.
• Your BST-100B comes with a micro SD card preloaded with
Sound Oasis sounds. The micro SD card must be inserted
into this slot in order for you to play the sounds on the micro
SD sound card.
• You may insert new micro SD cards preloaded with other
MP3 sounds or content (see the Using Other Micro SD
Cards section of this manual). Please check
www.soundoasis.com for our download library.
• Plug-in your headphones for private listening.
• The headphone jack accepts a 1/8” (3.5 mm) monaural or
stereo type plug.
• Your BST-100B can operate as a hands-free speaker for your
smartphone.
• Insert included USB charging cable to charge your BST-100B’s
battery or power your BST-100B from a USB source.
Operation
Power Sources
Your BST-100B can operate as a wireless, cord free sound machine or a
wireless Bluetooth speaker because it includes a built-in rechargeable
battery. You can also keep your BST-100B plugged into a USB power
source for continuous operation without recharging.
To Power By Built-In Rechargeable Battery:
1. Prior to using your BST-100B in the wireless, cord free mode for the first
time, please completely charge the built-in battery.
2. Connect the provided USB Charging Cable to a compatible AC-charger,
computer or laptop USB port. The unit’s CHG red LED is brightly
illuminated while charging. It takes about 2 to 3 hours to charge the
battery. When charging is completed, the CHG red LED will be very dim.
3. Disconnect the USB Charging Cable and operate your BST-100B as
described below.
4. When the unit is in low power status, the red CHG LED and amber LED
will flash. Please recharge the battery of your BST-100B when this occurs.
Note: When the battery is fully discharged, it needs about 30 minutes of
charging before you can use the unit again.
To Power By USB Charging Cable:
1. Connect the provided USB Charging Cable to a compatible AC-charger,
computer or laptop USB port.
2. Operate your BST-100B as described below.
8
9
