9. Do not apply excessive force when using any switches or controls.
damage the finish. Use a clean, dry cloth.
10. The unit should be connected to a power supply only of the type
described in the operating instructions or as marked on the unit.
11. Precautions should be taken so that the grounding or polarization
means of the unit are not defeated.
12. Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed on or against them, paying
particular attention to cords at plugs, convenience receptacles and the
point where they exit from the unit.
13. The unit is equipped with an attachment plug with overload
protection. This is a safety feature. If replacement of the plug is required, be
sure the service technician has used a replacement plug specified by the
manufacturer that has the same overload protection as the original plug.
14. The unit should be cleaned only as recommended in the instructions.
15. The power cord of the unit should be unplugged from the outlet when
left unused for long periods of time.
16. The user should not attempt to service the unit beyond that described
in the operating instructions.
17. Do not attempt to clean the unit with a chemical solvent as this might
damage the finish. Use a clean, dry cloth.
Note:
t 0QFSBUFDPOUSPMTBOETXJUDIFTBTEFTDSJCFEJOUIFNBOVBM
t #FGPSFUVSOJOHPOUIFQPXFSNBLFDFSUBJOUIBUUIFQPXFSDPSEJT
properly connected to the electrical outlet.
t 8IFONPWJOHUIFVOJUCFTVSFUPmSTUVOQMVHUIFQPXFSDPSE
7
