Sound Metrics ARIS Explorer 1800, Начало работы

Страница: 4 / 10

STEP 1
Attach the female end of the ARIS Cable to
the ARIS Sonar, making sure to line up the key
in the cable with the keyway on the connector.
Push in while tightening the ARIS Cable as tight
as possible by hand, ensuring that is it fully
engaged.
STEP 2
Attach the male end of the ARIS Cable to the
Command Module, making sure to line up the
key in the Command Module connector with the
keyway on the cable connector. Push in while
tightening the nut on the Command Module as
tight as possible by hand, ensuring that is it fully
engaged.
3 HOOKING UP THE SONAR
STEP 3
Pull the waterproof plugs out of the Command
Module. Line up the red dot on the Ethernet
Cable connector with the red dot on the
receptacle on the Command Module and push
in until connector is locked into place.
To release connector pull sleeve on the Ethernet
Cable back until it slips out of the receptacle.
STEP 4
Follow instructions in Step 3 to attach the Power
Supply to the Command Module.
The middle silver button is the On/Off switch.
3 HOOKING UP THE SONAR