Sound Leisure venue Скачать руководство пользователя страница 3

Страница: 3 / 7

QMS Document Venue Hub – Digital I/R Instructions Page

Version: 3.0 16/08/2016

Attach the metal bracket which holds the IR Receiver and hold it in place. Ribbon

cables on right hand side.

Attach the metal bracket you removed first on top of the IR mounting plate as this

pushes against the door switch Put both screws back in to secure it all in place.

Содержание venue

Страница 2: ... 2 of 7 Version 3 0 16 08 2016 Fitting the IR kit 1 Open the door and remove the metal bracket at the bottom of the door It is held in place by two screws 2 Remove the black rectangular piece of vinyl from the door or the IR signal will not pass through ...

Страница 3: ...2016 3 Attach the metal bracket which holds the IR Receiver and hold it in place Ribbon cables on right hand side 4 Attach the metal bracket you removed first on top of the IR mounting plate as this pushes against the door switch Put both screws back in to secure it all in place ...

Страница 4: ...ructions Page 4 of 7 Version 3 0 16 08 2016 5 Route the ribbon cable to the SLE1026 and Amplifier using the clips on the door 6 Connect the remaining 3 wire connector Blue Green and Yellow to the 4 pin header on the SLE 1026 Con 13 as below ...

Страница 5: ...QMS Document Venue Hub Digital I R Instructions Page 5 of 7 Version 3 0 16 08 2016 7 Plug the other connector into the Comms port on the amplifier 8 Remove the 2 RVC connectors from the amplifier ...