Control (Diag. 3)
1.
Effect Selector
. Rotary control for the DSP. Turn this knob to the
appropriate number to select the effect required. A list of the available
effects can be found on the right of Knob.
2.
EFF Level.
Controls the signal level sent from the effects unit to the
stereo output channels.
3.
Aux Send.
Controls the signal level sent to the aux output.
4.
Aux Return. Controls the signal level sent from the aux return to the
stereo main bus.
5.
Tape to Mix
Press this button to send the input signal from tape input
sockets to the main stereo bus.
AUX/RET
AUX/SEND
PHONES
EFFECT SELECT
MIC 4
LINE 4
MAIN
4
5/6
7/8
Model
G742BB
POWERED MIXER
TAPE TO MIX
TAPE TO
CTRL ROOM
TAPE
IN
REC
OUT
2 x 100w
DSP
EFFECTS PROCESSOR
G742BB (MC8240PD)
DO NOT
OBSTRUCT THE
VENTILATION
FOR PROFESSIONAL USE
Line 5/6 & Line 7/8.
Stereo line inputs channels via
6.35mm mono jacks. Use left inputs if using as mono
channels.
-10dB.
Press this button to attenuate the line level input by
10dB
Hi.
Use this knob to increase or decrease the high
frequencies.
Low.
Use this knob to increase or decrease the high
frequencies.
Aux.
Controls the amount signal level sent to the auxiliary
output for this channel.
Bal.
Controls the left/right signal level for this channel.
Level.
Controls the output level of these channels sent to
the main mix.
Diag. 2
Channels 5-8