Sound Devices MD-4 Скачать руководство пользователя страница 5

Страница: 5 / 18

User Guide

Sound Devices, LLC

1) AC Power Input

Accepts 100-240 VAC, 50/60 Hz

2) DC Power Input

XLR-4 connector for secondary power input,

accepts 10-18 VDC.

3) Dante RJ-45 Ethernet Connection

Connection to and from a Dante audio-over-Ether-

net network

4) Factory

USB A-type connector for updating MD-4 operating

firmware

5) Settings DIP Switches

Switches controlling input and output level ref-

erences. (See Analog Reference Level and Line

Outputs, respectively)

6) Phones/Monitor Output

1/4-inch headphone output wired tip-left, ring-

left, sleeve-ground. Identical signal as front panel

headphone jack. Output is muted when front

panel connection is in use. Can also be used to

drive unbalanced line inputs, such as powered

loudspeakers.

7) Line Outputs

Balanced XLR line output connections. Signal

source is assigned over Dante through Dante

Controller software, or equivalent.

Back Panel Descriptions

Содержание MD-4



















Результаты поиска

Содержание MD-4

Отзывы:

Бренды по названию

Популярные бренды

Sound Devices MD-4, Руководство пользователя

Результаты поиска

Содержание MD-4

Отзывы:

Бренды по названию

Популярные бренды