MixPre
User Guide
29
Timecode Modes
MIXPRE-3 AND MIXPRE-6:
AUX IN
Timecode can be derived from external timecode connected
to the TC In BNC or to the 3.5 mm Aux/Mic In connector.
HDMI TC IN
Many DSLR-style cameras output timecode via HDMI.
If HDMI TC In is selected without an HDMI source connected, the
MixPre will report missing sync. The MixPre has two HDMI timecode
modes,. HDMI flag for Sony, Panasonic, Nikon, Canon and Blackmag-
ic cameras and HDMI FUJIFILM for FUJIFILM cameras.
TIME OF DAY (TOD)
Alternatively known as 24 hr run mode, this is
similar to free run mode except that the timecode generator is auto-
matically loaded with the time of day. Use TOD mode when you want
the recorded WAV files to be timecode stamped with the time of day
generated by the internal clock.
OFF
Setting TC Mode to Off disables the timecode feature. When
Off, the time counter below the filename region on the home screen
displays elapsed time instead of timecode.
MIXPRE-10T:
FREE RUN
Timecode runs continuously. Timecode continues count-
ing accurately for up to four hours after power-down.
REC RUN
Timecode runs while recording and is stationary when not
recording. In this mode, timecode defaults to the last stationary val-
ue at power-up. When switching to Record Run from another mode,
the internal generator will stop at the last timecode value. Timecode
output can be used to trigger other equipment that supports time-
code remote triggering to start and stop recording.
TIME OF DAY (TOD)
Alternatively known as 24 hr run mode, this is
similar to free run mode except that the timecode generator is auto-
matically loaded with the time of day. Use TOD mode when you want
the recorded WAV files to be timecode stamped with the time of day
generated by the internal clock.
BNC IN, AUX IN
Timecode can be derived from external timecode
connected to the TC In BNC or to the 3.5 mm Aux/Mic In connector.
HDMI TC IN
Many DSLR-style cameras output timecode via HDMI.
If HDMI TC In is selected without an HDMI source connected, the
MixPre will report missing sync. The MixPre-10T has two HDMI
timecode modes,. HDMI flag for Sony, Panasonic, Nikon, Canon and
Blackmagic cameras and HDMI FUJIFILM for FUJIFILM cameras.
OFF
Setting TC Mode to Off disables the timecode feature. When
Off, the time counter below the filename region on the home screen
displays elapsed time instead of timecode.
