Sound Devices 702T, Руководство пользователя, Страница: 69 / 84

702T User Guide and Technical Information
67
# Setup Name Setup Description Setup Options
30
31
Line Input 1: Gain
Line Input 2: Gain
Adjusts the input sensitivity of line-level inputs
when set to Use Sensitivity Settings.
Adjustable from -6 dB to +18 dB in 0.1 dB steps.
32
33
Input 1: Delay
Input 2: Delay
Sets a digital delay for each input. Can be
used to compensate for delay in various
digital wireless microphone units or digital
processors.
0 to 30 milliseconds, 0.1 mS increments
0 mS to 30,000 mS up to 48.048 kHz Fs
0 mS to 15,000 mS up to 96.096 kHz Fs
0 mS to 7,500 mS up to 192 kHz Fs
34 File: Marker Mode Enables the user to set cue points on the fly
while recording by pressing the record key.
• Markers Disabled
No cue marks are set.
• New Cue
Cue markers will be set within one contiguous file.
• New File
A new file is started with each press of the record
key, the take counter is increased by one.
35 File: Max Size Selects the file size where the 702T will close,
then start a new file. The 702T will not record
a file larger than the selected size.
The largest file permissible with the 702T’s
FAT32 file system is 4 GB
• 4 GB CF (3.6 GB)
• 2 GB CF (1.8 GB)
• 1 GB CF (950 MB)
• 512MB CF (450 MB)
36 File: Folder Options Allows user to organize files in root and sub-
folders. To not use any folders select <None>
on every level.
• TOP-LEVEL
• MID-LEVEL
• BOTTOM-LEVEL <None>, <Add new entry>
<None>,<Add new entry>, <Daily>
<None>, <Add new entry>, <Scene>
37
File: View Files
Enters the file directory tree for the selected
drive.
Highlight media descriptor to navigate the menu
38 File: View Take List Allows user to view the last 200 takes. Takes
can be selected and converted to circle takes.
• Circle
39 File: Copy Files Allows the user to select a file or a range of
files to be copied from one storage media to
another. Files will only be copied from their
current directory to a directory of the same
name on the other media. If a file will not fit on
the destination media, user is given the option
to skip that file and continue with the copy or
abort the copy all together. User is advised at
the end of the copy process how many files
were copied successfully.
• Copy all {drive}

{drive}
• Last 24 hr {drive}

{drive}
• Last 48 hr {drive}

{drive}
• Flagged {drive}

{drive}
All files, when recorded, automatically have their flag
bit set to “on”
40
File: Copy Flag Reset
Selects whether the flag bit is cleared or not
on files copied from one media to another.
• Disabled
• Enabled
41 Time Code: Frame Rate Sets the time code frame rate. All common
time code frame rates are available.
• 23.976 – used with high definition video cameras
• 24 – to sync audio to film where no transfer to
NTSC video is expected
• 25 – to sync sound to PAL video
• 29.97 – to sync sound to NTSC video shot in non-
drop frame mode
• 29.97DF - to sync sound to NTSC video shot in
drop frame mode
• 30 – to sync sound to film where transfer to NTSC
video is expected
• 30DF – to sync sound to film for transfer to NTSC
video in drop-frame mode
• 30+ – Records at 48.048 sampling rate at 30
frames per second but stamps the file at 48kHz, 30
frames per second