13
Care and Maintenance1
Wipe with a dry, soft cloth for stubborn stains or dirt. Do not use volatile fluids, Benzene, paint thinner, polishing
powder, this may damage the surface.
Do not use detergents, detergent ingredients may damage the unit. Keep the unit away from water.
When the third circle on the sensor plate flashes, the HEPA filter needs to be replaced.
1. Stop the operation and unplug the unit.
2. Open the bottom plate, disconnect the power cord from Germicidal UV lamp, take off the unit lock.
3. Take out the used HEPA filter and replace with a new one.
4. After replacing the HEPA filter, hold the POWER button for 3 seconds to reset the time for the HEPA filter.
Warning
To maintain optimum performance of this air purifier, the HEPA filter, the Activated carbon filter and the
UV-C+ bulb need to be replaced when the indicator lights are flashing.
When maintenance on the unit, be sure to unplug the power cord, and never handle the plug with wet hands.
If so, electrical shock and bodily injury may occur as a result.
Main unit
Replacing the HEPA filter
