sNH-10G
Operating instructions
Rev1.1
Precaution
Please read this instruction carefully before use.
Do not attempt to disassemble or modify the product.
Keep the product away from the external shocks or vibrations
.
Do not use the damaged or peeled cables.
Do not use the product outdoors.
Product specifications and features are subject to change without notice
.
Warranty Information
Free warranty service
In case of the defect is found caused by the design or the production flaw while using the device properly, a manufacturer is
responsible for the faulty product and the free warranty service for 1 year from the date of purchasing.
Even in the warranty service period, malfunction or damage of products caused by the inevitable incident such as a natural
disaster is not subject of the free warranty service.
Warranty service at a cost
The product that free warranty service period is expired.
Malfunction of the product caused by a user’s fault.
Malfunction of the product caused by incidents.
Malfunction of the product caused by a natural disaster such as earthquake, flood, lightning & etc.
In case of the warranty service at a cost, a customer should cover the transportation costs.
Examples about an user’s fault
In case of attempts to disassemble or modify the device.
In case of not following the instructions on this manual.
Please read this operating instructions and Q&A board on our website carefully before asking for the warranty service.
Supplied components
A sNH-10G unit
An operating instruction
Specification
User interface
Power indicator LED x 1
Link indicator Front LED x 10, Rear LED x 8
Active indicator Front dual Color LED x10, Rear LED x 8
Power switch : Power off, Power on with LED or without LED
Network
Supported Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX 100Mbps over fiber optic
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-T 1 Gbps over fiber optic
IEEE 802.3x flow control and backpressure
Full-duplex and half-duplex operation
Supports 9216 byte jumbo packet length
Connector
RJ-45 ports x 8
SFP ports x 2
Optional audio grade clock
sCLK-EX with 10MHz Master clock input
DC power input
Input voltage : 9Vdc
Optional 12Vdc when installing sCLK-EX
Optional 6.5Vdc ~ 8.5Vdc when installing sCLK-EX
Voltage tolerance: ±10%
Input current : 2A max
5.5mm OD, 2.1mm ID adaptor jack
Operating environment
Operating temperature : +10 ~ +30℃
Storage temperature : 0 ~ +40℃
Operating & storage humidity : 10% ~ 90%
Dimension
296 x 211 x 50(mm)
Weight
2 Kg >
Ultimate High Performance Audio
www.sotm-audio.com
