- 6 -
2
Turn on sMS-100 and check the operation status.
2.1
Please turn on sMS-100 by connecting the standard wall adaptor (9V/2A) or mBPS-d2s
to POWER IN jack on the rear panel of sMS-100.
2.2
Please wait around 5mins until the sMS-100 boot process is completed.
2.3
Once finished the booting, please connect sMS-100 Web Page to check the operation
status.
2.3.1
How to connect sMS-100 Web Page
2.3.1.1
Please type ‘http://sonicorbiter.com/my/’ on an address bar in a web
browser to check sMS-100’s IP address.
(If you can’t access the sMS-100 Web page, you need to wait a bit more until the
booting will be finished completely.)
2.3.1.2
Please click the IP address on the screen or type the IP address or
‘http://sonicorbiter.local/’ on an address bar in a web browser to connect
sMS-100 Web Page.
