© 1996-2021 SOTA Instruments Inc.
Page 10 of 14
|
www.sota.com
The Silver Pulser Model ZBB1 Manual
www.sota.com/spug offers suggestions for Focused, Basic and Ongoing Wellness
Plans.
General Guideline: Use daily for a minimum of 8 to 12 weeks. Once completed,
setting a schedule for ongoing use is beneficial.
Drink Plenty of Water: It’s important to drink enough water when using the unit.
Drinking ozonated water is especially helpful.
Stop Gradually: Reduce the amount of time each day for the last week of use. If
using more than one SOTA unit, it is suggested to stop only one unit at a time.
HOW TO USE THE IONIC~COLLOIDAL SILVER FUNCTION
HOW TO ASSEMBLE THE SILVER WIRE HOLDER OPTION
1. The Silver Wires fit into the two small holes in the Silver
Wire Holder as in the picture.
2. To insert the Silver Wires, move the spring clip away from
the hole.
3. Push the wire through the hole. Most of the wire should
be below the holder. Release the spring clip to hold the
Silver Wire snuggly in place. It may be easier to insert
from the underside of the holder.
4. Repeat Step 2 for the second Silver Wire.
5. Plug the Silver Wire Holder into the Silver Pulser.
HOW TO MAKE IONIC~COLLOIDAL SILVER
1. Insert Silver Wire Cord or Silver Wire Holder into the unit.
2. Heat 2 cups (500 ml) of distilled water to the boiling point—preferably in a non–
metal container. Do not use a glass measuring cup on the stove top as it may
explode.
3. Use a heat-resistant glass container to make Ionic~Colloidal Silver.
SILVER CORD OPTION
4. Place the Silver Wires in the glass container immersing at least 70% of the Silver
Wires into the water. Keep them at least 25 mm or 1 inch from the bottom of the
