Instructions for the SOTA Bio Tuner, Model BT5pro
• The SOTA units are consumer products designed to be used as part of a Wellness Lifestyle • The SOTA units are not medical devices nor are
they intended to diagnose, treat or cure any medical or health condition • The use, safety or effectiveness of the SOTA units has not been
approved by any government agency • Please consult a health practitioner for any medical or health condition. • Results using the SOTA
Products will vary for each person. • Please note that all purchases of SOTA Products are deemed to be made in Penticton, BC, Canada •
© 2008 SOTA Instruments Inc.
Page 4 of 7
www.sota.com
4. While this technology is generally considered safe, there exists potential for rare
individual reactions that cannot reasonably be foreseen. Therefore, your use of
the SOTA Products constitutes your agreement that you are responsible for your
decision to use the technology.
SUMMARY OF LIGHTS
GREEN: Indicates the Bio Tuner is in
operation and the current is flowing
through the Conductive Pads.
RED: Indicates the battery is low and will
soon need replacing.
HOW TO USE THE BIO TUNER
1. Place the 9-Volt Alkaline battery in the
unit.
a. On the back of the unit, slide off the
battery cover.
b. Clip the battery connections in the
battery compartment to the 9-Volt Alkaline battery terminals.
c. Slide the 9-Volt Alkaline battery into the case and push down.
d. Slide the cover back onto the unit.
CONDUCTIVE PADS OPTION
2. Clean the area behind each ear to eliminate
skin oils. This will allow for better
conductivity.
a. Insert the Cord into the jack on the unit.
b. Attach one set of Conductive Pads to each
connection on the Cord.
c. Attach a Conductive Pad behind each ear
lobe as in image 1.
1
