![background image](http://html1.mh-extra.com/html/sota/bio-tuner-bt9/bio-tuner-bt9_manual_1332939004.webp)
© 2015-2022 SOTA Instruments Inc.
Page 4 of 9
|
www.sota.com
The Bio Tuner Model BT9 Manual
yelloW
: Used for testing to ensure the flow of current through the Unit, Cord and
ear clips.
hoW to Use the Bio tUner
1. place the 9-Volt Alkaline battery in the unit.
a. on the back of the unit, slide off the battery cover.
b. position the 9-Volt Alkaline battery so the positive
(+) and negative (-) terminals line up as in
image 1.
note: the smaller circle on the battery matches
the smaller circle in the case … the larger battery
circle matches the larger circle in the case.
c. Slide the 9-Volt Alkaline battery into the case and
push down.
d. Slide the cover back onto the unit.
2. clean ear lobes to remove oils from the skin. this will
allow for better conductivity.
3. Slide the Arm Band up the arm to a comfortable
position. tighten the band to secure it in place as in
image 2.
options:
a. if preferred the unit can be placed in a pocket.
b. if the Arm Band is too
large a shorter Arm Band
is available.
4. insert the cord into the jack on the unit as in image
3. the USB symbol on the plug should be facing up.
When the plug is positioned correctly, it will slide in
gently. do not force.
5. Slide the clip on the back of the Bio tuner onto the
holding clip on the Arm Band as in image 4.
6. insert the pins on the cord into the ear clips.
3
1
2